구입 및 기술문의 : 010-4221-0660
9320-01,9320은 Hioki 메모리 하이코더의 전압/ 접점신호의 ON/OFF 검출용 고속 4채널 로직 프로브입니다.
| 모델 | 설명 | Quote |
| 9320 | 메모리 하이코더용, 대형 단자 타입 |
Logic signal detection probe
Detector of highs and lows in voltage or relay contact signals for recording purposes.
The 9320 is a logic probe with indicator. It is connected to the logic input unit for the 8800 series Memory HiCorders. It is equipped with a selector for each channel, so that the input type can be switched between digital input and contact input for each channel. This makes it possible to use this probe for a variety of applications such as measurement of electronic circuits and operation timing of mechanical relays.
It is possible to use the 9320 for 8807/08 by using optional 9323 CONVERSION CABLE.
| Function | Detection of voltage signal or relay contact signal for High/Low state recording |
| Input | 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detect open-collector signals) Input resistance : 1 MΩ (with digital input, 0 to +5 V) 500 kΩ or more (with digital input, +5 to +50V) Pull-up resistance : 2 kΩ (contact input: internally pulled up to +5 V) |
| Digital input threshold | 1.4V/ 2.5V/ 4.0V |
| Contact input detection resistance | 1.4 V : 1.5 kΩ or higher (open) and 500 Ω or lower (short) 2.5 V : 3.5 kΩ or higher (open) and 1.5 kΩ or lower (short) 4.0 V : 25 kΩ or higher (open) and 8 kΩ or lower (short) |
| Response pulse width | 500 ns or more |
| Max. allowable input | 0 to +50V DC (the maximum voltage that can be applied across input pins without damage) |
| Dimensions and mass | 62 mm (2.44 in)W × 94 mm (3.70 in)H × 20 mm (0.79 in)D, 150 g (5.3 oz), Main unit cable 1.5 m (4.92 ft), input section cable 300 mm (0.98 ft) |
| Accessories | IC clip leads ×1, Alligator clip leads ×1, Carrying case ×1, Instruction Manual ×1 |
등록된 상품이 없습니다.
상품문의가 없습니다.
